What’s New Mastercam 2021 – Advanced Drill
See how the new Advanced Drill toolpath in Mastercam 2021 makes it easier to program multi-segment drilling operations.
Bo Rohde October 20, 2020
Read More »
What’s New Mastercam 2021 – Bounding Box
Quickly calculate the raw material needs and define the stock model shape with the new bounding box feature in Mastercam 2021.
George Simmons October 15, 2020
What’s New Mastercam 2021 – Chamfer Drill Toolpath
Adding chamfers or spot drilling holes of various sizes on a single part just got easier with the new Chamfer Drill toolpath in Mastercam 2021.
Bo Rohde October 15, 2020
What’s New Mastercam 2021 : Output Rapid as Feed & Fillets on Rapid Retract
You can now use the output feed move option in Mastercam 2021 to output the rapid move between passes as a feed rate move instead of a rapid move.
Danny Ornelas October 13, 2020
What’s New Mastercam 2021 : Skip All Pockets in Optirough
In Mastercam 2021, OtpiRough toolpaths have a new option to skip all pockets automatically, preventing entry into any closed pockets to prevent tool chatter or wear.
Bo Rohde October 8, 2020
What’s New Mastercam 2021 : Roll-in Option for Facing Toolpath
Mastercam 2021 contains a new option that begins each pass with a roll-in arc to ramp up the chip load and extend tooling life.
Brian Gleeson October 6, 2020
What’s New Mastercam 2021 : 3+2 Automatic Roughing
The new 3+2 Automatic Roughing in Mastercam 2021 is extremely fast to program and can be configured for fully automatic or manual use.
David Ferguson October 1, 2020
What’s New Mastercam 2021 : Edit & Reflow UV Curves
In Mastercam 2021, Reflow UV allows a new surface to be created as a single entity instead of disconnected geometric features.
Sherman Snyder September 25, 2020
What’s New Mastercam 2021 : Exact Multiaxis Offsets
With Exact mode in Mastercam 2021, the offsets are performed across the selected surface to maintain equal spacing as the surface curves around.
David Ferguson September 24, 2020
What’s New Mastercam 2021 : Extend Edges
If for any reason the curves or edges are too short to cover the face that needs to be machined it can be extended in Mastercam 2021.
David Ferguson September 23, 2020
What’s New Mastercam 2021 : Multi-Axis Pocketing
In Mastercam 2021, Multiaxis Pocketing is combined with Accelerated Finish tools, so that the correct tool-contact parameters are maintained automatically.
M Scott Lindsay September 15, 2020
What’s New Mastercam 2021 : High Speed Toolpaths
In Mastercam 2021, high speed toolpaths quickly remove material with minimal wasted motion, making it easier to get a superior finish on your part.
David Ferguson September 10, 2020